So im putting on the shower drain now, but im not sure where to use the plumbers putty. I has the rubber seal on top and the cardboard like one on the bottom. Should I just use it on the bottom outside seal where the bottom hole is not so smooth? Im thinking there is no point in using it on the top but will if it will help.
Thanks.
plumbers putty on shower drain
Started by aviator79, Aug 19 2009 09:43 PM
9 replies to this topic
#1
Posted 19 August 2009 - 09:43 PM
#2
Posted 19 August 2009 - 11:10 PM
Is this for a shower or a pond? If its for a pond I'd say get some aquarium grade silicone.
www.almarsguides.com
#3
Posted 20 August 2009 - 12:37 AM
If you just tighten it up real good the rubber seal should do it's job. Even when I use them on showers I don't use plummers puddy. It should be designed to make a good seal. I would think that you would only need to add to the rubber seal if you have some added force on the seal, like the piping being pulled to one side or the other or on a really rough surface.
#4
Posted 20 August 2009 - 01:30 AM
On a shower i put the putty on the shower side ,,on the other side you have the rubber ,then the card board friction ring,.. and nut
In a pond i would use silicone instead of putty
In a pond i would use silicone instead of putty
#5
Posted 20 August 2009 - 04:28 PM
It is for the filter stock tank. I thought it was plumbers putty that was recomended, but now I see it is Plumbers Goop, which is more like silicone. I will get a tube of that and use on top flange and inside hole, and I will figure out way to smooth the bottom better and keep the rubber and friction gasket on the bottom/outside. Simple question but glad I waited and asked as I need this to be 100% leak proof for a long time as I dont want to have to pull the tank out. I got a strap wrench as my drains dont have nuts, so I should be able to get it good and tight with that and a hammer and screwdriver. Thanks.
#6
Posted 20 August 2009 - 04:54 PM
aquarium sealant is what i used for all seals.
theres definately something fishy about this forum!
#7
Posted 20 August 2009 - 05:08 PM
I agree with koiguy & the doc, when comes to fish, use clear silicone. Let it dry completely and it won't be toxic to your fish.
OldMarine
SSgt. Rich Kruger Zone 7 to 8 <><
www.picasaweb.google.com/oldmarine1969 < Pictures
SSgt. Rich Kruger Zone 7 to 8 <><
www.picasaweb.google.com/oldmarine1969 < Pictures
#8
Posted 20 August 2009 - 06:45 PM
I use PL roofing and flashing sealant. The good thing about it is that if you ever need to remove it, it can be stripped off. The goop stuff stays on and is very hard to remove. Almost impossible.
If you're wondering, the roofing sealant is fish safe.
If you're wondering, the roofing sealant is fish safe.
#9
Posted 21 August 2009 - 07:09 PM
I used aquarium silicone. I just hope it holds forever. I couldnt get the thing that tight because the inside kept on spinning.
#10
Posted 21 August 2009 - 11:27 PM
I think most plumbers puttys contain petroleum distillates.
DrDave
“Wisdom is not a product of schooling but of the lifelong attempt to acquire it”. Albert Einstein
http://drdaveskoi.tripod.com
http://plansbyjorde.tripod.com
“Wisdom is not a product of schooling but of the lifelong attempt to acquire it”. Albert Einstein
http://drdaveskoi.tripod.com
http://plansbyjorde.tripod.com

Create Account
Sign In
Forums
Members
Gallery









