Jump to content



- - - - -

Sticky Doc Bio Filter


220 replies to this topic

#1 DrDave

    Innovator

  • Moderators
  • 6851 posts
  • Location:Escondido, Ca USA

Posted 05 December 2009 - 01:32 AM

Pictures or the Doc Bio Filter are attached. These may also be found at any time from my signature link.

The Doc filter uses 1/2" irrigation tubing cut about 1 1/2" long and there are about 7000 of them. The overflow goes down a cascading water and its peformance is superior to anything I have ever used in my almost 42 years of ponding. These tubes will never clogg and will backflush without any problems since they do not retain water or the impurities that some of the other medias do.

The output water is as clear as bottled drinking water and this filter will take a pea soup pond to clear in 48 hours after installation.

Link to filter: http://drdaveskoi.tr...bio_filter.html

Attached Thumbnails

  • Attached Image: G_55 gal 2 in dump valve.jpg
  • Attached Image: J_55 gal inlet and support installed.jpg
  • Attached Image: M1_55 gal grate inlet assy.jpg
  • Attached Image: N2_55 gal filter top view.jpg

Edited by Ian, 05 December 2009 - 03:08 PM.
Added link to page

DrDave
“Wisdom is not a product of schooling but of the lifelong attempt to acquire it”. Albert Einstein
http://drdaveskoi.tripod.com
http://plansbyjorde.tripod.com


#2 gambitmac

  • Members
  • 46 posts
  • Location:Pryor, Ok

Posted 23 April 2010 - 05:13 AM

Is there any way we could get a parts list posted?

#3 DrDave

    Innovator

  • Moderators
  • 6851 posts
  • Location:Escondido, Ca USA

Posted 23 April 2010 - 12:17 PM

If you go to the link, you will find this one and the new style "Doc Filter" in detail. Parts list is pretty much self explanatory.
DrDave
“Wisdom is not a product of schooling but of the lifelong attempt to acquire it”. Albert Einstein
http://drdaveskoi.tripod.com
http://plansbyjorde.tripod.com

#4 Olee

  • Members
  • 129 posts
  • Location:Wash. DC

Posted 06 May 2010 - 04:22 AM

Just a quick question:
Would it be better to have the dump valve on the actual bottom of the drum? It would seem that I would be guaranteed to get all the crud out and I would have a flat surface to attach to... Yes No?

Thanks.
Olee
Centreville, VA (just outside DC.)

#5 DrDave

    Innovator

  • Moderators
  • 6851 posts
  • Location:Escondido, Ca USA

Posted 06 May 2010 - 12:10 PM

Yes, closer to the bottom is better. That means you will have to suspend your drum for the clearance required.
DrDave
“Wisdom is not a product of schooling but of the lifelong attempt to acquire it”. Albert Einstein
http://drdaveskoi.tripod.com
http://plansbyjorde.tripod.com

#6 Olee

  • Members
  • 129 posts
  • Location:Wash. DC

Posted 06 May 2010 - 12:17 PM

I plan on setting it on 2 layers of cinder block, therefore I will be placing the dump on the bottom. Thanks.
Olee
Centreville, VA (just outside DC.)

#7 DrDave

    Innovator

  • Moderators
  • 6851 posts
  • Location:Escondido, Ca USA

Posted 06 May 2010 - 04:01 PM

You might want to use a piece of plywood between the cinder blocks and the drum to help distribute the weight. Otherwise, the drum may not last long.
DrDave
“Wisdom is not a product of schooling but of the lifelong attempt to acquire it”. Albert Einstein
http://drdaveskoi.tripod.com
http://plansbyjorde.tripod.com

#8 Olee

  • Members
  • 129 posts
  • Location:Wash. DC

Posted 06 May 2010 - 07:04 PM

I have already built a support structure out 2x4s but maybe laying a piece of plywood over that would provide even more support, thanks for the suggestion.
Olee
Centreville, VA (just outside DC.)

#9 DrDave

    Innovator

  • Moderators
  • 6851 posts
  • Location:Escondido, Ca USA

Posted 06 May 2010 - 10:48 PM

These drums are not as bulletproof as you might think. I set mine down too hard and it cracked. Now I have to use plastic liners in it. I use it to have water on hand for my nursery and hospital aquariums.
DrDave
“Wisdom is not a product of schooling but of the lifelong attempt to acquire it”. Albert Einstein
http://drdaveskoi.tripod.com
http://plansbyjorde.tripod.com

#10 DrDave

    Innovator

  • Moderators
  • 6851 posts
  • Location:Escondido, Ca USA

Posted 27 June 2010 - 12:59 AM

I just posted another video on You Tube.
[ame="http://www.youtube.com/watch?v=iBXG9cAIzjQ"][/ame]
DrDave
“Wisdom is not a product of schooling but of the lifelong attempt to acquire it”. Albert Einstein
http://drdaveskoi.tripod.com
http://plansbyjorde.tripod.com

#11 phillyofish

  • Members
  • 116 posts
  • Location:Phila, PA

Posted 21 July 2010 - 05:41 PM

Dr. i'm trying out the plastic fencing also. I'm adding a twist by cutting them in smaller rolls like hair curler lengths and tying them with fishing line.It will be placed in a laundry bag with some bio balls that i had left over. Thanks for the concept.

sam

#12 lee

  • Members
  • 173 posts
  • Location:Warrington UK Cheshire

Posted 21 July 2010 - 05:56 PM

hi am just wondering what do theys bio balls do ?

#13 DrDave

    Innovator

  • Moderators
  • 6851 posts
  • Location:Escondido, Ca USA

Posted 21 July 2010 - 06:38 PM

They provide surface area for the good guys to populate.
DrDave
“Wisdom is not a product of schooling but of the lifelong attempt to acquire it”. Albert Einstein
http://drdaveskoi.tripod.com
http://plansbyjorde.tripod.com

#14 lee

  • Members
  • 173 posts
  • Location:Warrington UK Cheshire

Posted 21 July 2010 - 07:01 PM

o ok then so it is worth haveing then ?

#15 DrDave

    Innovator

  • Moderators
  • 6851 posts
  • Location:Escondido, Ca USA

Posted 21 July 2010 - 07:07 PM

Yes they are worth having. That said, most any plastic will work.
DrDave
“Wisdom is not a product of schooling but of the lifelong attempt to acquire it”. Albert Einstein
http://drdaveskoi.tripod.com
http://plansbyjorde.tripod.com