Hi, first time posting!
I would like to use a section of my existing pond and create a bog using a porous wall to separate the two. Pond is 25’ x 20’ x 5’ deep with sloping bottom with a bottom drain. The bog is in the end opposite the waterfall and would be fed by a skimmer and external pump.
My question, the separation wall would be constructed of flat basalt flagstone rocks, what is best procedure to lay first layer of rock on existing liner, subsequent layers would then be stacked.
Thinking of constructing bog in a Aquascape method, any suggestions or advice is appreciated.
regards
I would like to use a section of my existing pond and create a bog using a porous wall to separate the two. Pond is 25’ x 20’ x 5’ deep with sloping bottom with a bottom drain. The bog is in the end opposite the waterfall and would be fed by a skimmer and external pump.
My question, the separation wall would be constructed of flat basalt flagstone rocks, what is best procedure to lay first layer of rock on existing liner, subsequent layers would then be stacked.
Thinking of constructing bog in a Aquascape method, any suggestions or advice is appreciated.
regards
