Marshall
Turtle Keeper + CPL(H)
I finally had enough of my servers getting bottle-necked when doing web-updates and during rush-hour on my web-sites so I ordered a new set of co-processors for them and they arrived and I installed them this morning. So far I have a 1,400 % increase in floating-point arithmetic and about a 300% to 350% boost in up-down traffic. After I get them primed and tweak the architecture a bit I should gain another 200%+ in overall performance. If anyone has a server or a computer that is too sluggish but still too new to just scrap then I highly recommend these new Phi setups from intel. The ones I got are 61-Core with on-board cooling and are clocked at 1.2 GHz stock but I have mine over-clocked to 1.87 GHz but you will need a liquid cooler to do this because the air-cooler does not do well once you exceed about 1.3 GHz. If you have any questions I will be more than happy to answer and will also be publishing a review after I have ran them for a while. I will post the general specs and a picture below.
Type: Co-Processor
HM/C: Fan/Air (Compatible w/Liquid)
Series: Phi by intel
Core: 61 @ 1.2 GHz
Cost: $4,218.17 (each)
Box: Server as long as a single rack is empty (air) or 3 racks (Liquid)
Architecture: 64 bit with full adjustment unlocked as is.
Type: Co-Processor
HM/C: Fan/Air (Compatible w/Liquid)
Series: Phi by intel
Core: 61 @ 1.2 GHz
Cost: $4,218.17 (each)
Box: Server as long as a single rack is empty (air) or 3 racks (Liquid)
Architecture: 64 bit with full adjustment unlocked as is.