Photos of my pond from start of the project up to present time.

[Marshall]

The photos are not in perfect chronological order but it should be obvious which order they basically go in. There also some images of the equipment I used to build it including the result of a thunderstorm that caused my hand built utility vehicle/ATV/work vehicle vehicle to get stuck and then it broke a shock and rolled over

d roll over.

 

[Big Lou]

Your pond has a clay or concrete bottom, walls and holds water with no loss? If so that's great. Details please.

 

[Marshall]

Your pond has a clay or concrete bottom, walls and holds water with no loss? If so that's great. Details please.

It has a concrete layer to reinforce the bottom but the water is held in with a pvc lining. The water table is about 25 feet below the area my pond is in so I had to use a liner. My small pond is lined with potash & stone and it looses about 8 gallons a month but I have plans to install a pvc liner in it too eventually

 

[Big Lou]

I would suggest you use an EDPM liner. It is proven to be far superior to PVC. Looking forward to more about your developing pond.