pond pumps and filters

sissy

sissy
Joined
Jan 17, 2011
Messages
33,086
Reaction score
15,702
Location
Axton virginia
Showcase(s):
1
Hardiness Zone
7A
Country
United States
what kind of pump how many gph and how many watts of power and are you happy with it and filters how many have built there own and how many times have you change the filter design or built a bigger filter or just tried something new .I get confused by all the pumps they may have the same gph use less or more watts and have less head .Warranty 's and prices are every where .I think they want to just confuse new and old ponders .Why is there also not a rating system for pumps .I have contacted consumer affairs but they say it is because there seems to be no interest in them from consumers .They did do a few a couple of years ago as a test but interest did not pan out for them to add it .
 

sissy

sissy
Joined
Jan 17, 2011
Messages
33,086
Reaction score
15,702
Location
Axton virginia
Showcase(s):
1
Hardiness Zone
7A
Country
United States
I have one of the smartpond pumps from a couple of years ago it works ok less wattage but had to take it over to the other house to put it in that pond .I saw on you tube one of the pond builders did a bog filter with gravel for a patio pond and planted it with plants
 

sissy

sissy
Joined
Jan 17, 2011
Messages
33,086
Reaction score
15,702
Location
Axton virginia
Showcase(s):
1
Hardiness Zone
7A
Country
United States
have to ask since I have been seeing this alot on pond pumps ceramic shaft verse stainless steel shaft .Which is really better ,Looked at some pumps that say ceramic but it looks stainless steel to me
 

HARO

Pondcrastinator
Joined
Jun 30, 2011
Messages
5,439
Reaction score
6,233
Location
Ontario, Canada
Hardiness Zone
5b
Country
Canada
Ceramic shafts wear more slowly than SS, but are rather brittle. Not a big deal, unless you drop a pump on the ground.
John
 

sissy

sissy
Joined
Jan 17, 2011
Messages
33,086
Reaction score
15,702
Location
Axton virginia
Showcase(s):
1
Hardiness Zone
7A
Country
United States
would cold water effect them more since I leave my pond running all winter .I have stainless steel now but wonder because ceramic just seems to me it would get brittle because of heat from it running and the cold from the cold water .I don't know if I have ever had one with ceramic shaft
 

HARO

Pondcrastinator
Joined
Jun 30, 2011
Messages
5,439
Reaction score
6,233
Location
Ontario, Canada
Hardiness Zone
5b
Country
Canada
The ceramic shaft wouldn't be a problem unless your pump freezes, but in that case the pump would probably be toast anyway!
John
 

sissy

sissy
Joined
Jan 17, 2011
Messages
33,086
Reaction score
15,702
Location
Axton virginia
Showcase(s):
1
Hardiness Zone
7A
Country
United States
I am going to try the laguna pump one more time but remembered to tell them I do not want the china made one ,like you said .I got the 2900 gph and uses 130 watts .I still have the one that does not work right.I figured for a second pump with that low wattage would work and it has a 4 year warranty
 

sissy

sissy
Joined
Jan 17, 2011
Messages
33,086
Reaction score
15,702
Location
Axton virginia
Showcase(s):
1
Hardiness Zone
7A
Country
United States
well today checked the harbor freight pump again on watt tester and so far still using 170 watts out of the 175 it is supposed to use and pumping enough to fill both filters and extra for the top of the pond .I am using the same splitter as I used on my old HF one so all is good 2150gph
 

Attachments

  • pump and hose connectors 011.JPG
    pump and hose connectors 011.JPG
    206.3 KB · Views: 295
  • pond 2014 after ice melted overnight 004.JPG
    pond 2014 after ice melted overnight 004.JPG
    180.4 KB · Views: 389
  • pond 2014 after ice melted overnight 005.JPG
    pond 2014 after ice melted overnight 005.JPG
    207.2 KB · Views: 290
  • pond 01 26 2014 001.JPG
    pond 01 26 2014 001.JPG
    184.8 KB · Views: 319

sissy

sissy
Joined
Jan 17, 2011
Messages
33,086
Reaction score
15,702
Location
Axton virginia
Showcase(s):
1
Hardiness Zone
7A
Country
United States
you can see it hanging there it is tied to a pipe across the pond so it is off the bottom
 

Attachments

  • pond 2014 003.JPG
    pond 2014 003.JPG
    152.5 KB · Views: 304

sissy

sissy
Joined
Jan 17, 2011
Messages
33,086
Reaction score
15,702
Location
Axton virginia
Showcase(s):
1
Hardiness Zone
7A
Country
United States
also meant to say the reason they are selling the older laguna ones on ebay is because the new stock is in and they are located in Maryland and only charge tax for people who live there ,doesn't seem fair but you can't change that.By the way I was buyer 8 and seen there was 9th buyer this morning
 

j.w

I Love my Goldies
Joined
Feb 1, 2010
Messages
33,055
Reaction score
20,332
Location
Arlington, Washington
Showcase(s):
1
Hardiness Zone
USDA 8a
Country
United States
Hard to see in your photo as it is so small. If you click on the option to load the bigger file next to the small ones your photos will show bigger.
 

j.w

I Love my Goldies
Joined
Feb 1, 2010
Messages
33,055
Reaction score
20,332
Location
Arlington, Washington
Showcase(s):
1
Hardiness Zone
USDA 8a
Country
United States
Never mind I just clicked on yours and it went big lol! I have this add on where you are supposed to be able to float your mouse arrow over and make it big. Guess it only works on certain types of photos.
 

sissy

sissy
Joined
Jan 17, 2011
Messages
33,086
Reaction score
15,702
Location
Axton virginia
Showcase(s):
1
Hardiness Zone
7A
Country
United States
I can just click on the photo and it gets bigger .can you do that .
 

j.w

I Love my Goldies
Joined
Feb 1, 2010
Messages
33,055
Reaction score
20,332
Location
Arlington, Washington
Showcase(s):
1
Hardiness Zone
USDA 8a
Country
United States
Yep figured that out. I was so used to just hovering over w/ this add on thing that made it bigger before they changed the forum I lost my clicker,lol!
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Members online

No members online now.

Forum statistics

Threads
30,871
Messages
509,594
Members
13,096
Latest member
bikmann

Latest Threads

Top