Reply to thread

Message: [QUOTE="CrazyLittleScooby, post: 378426, member: 10360"] Hello. I have a SmartPond WP1200 pump and I am trying to match it with an Oase Frothy (35-10E) fountain nozzle that I have from my previous Oase Acquarius 2000 pump that died a year ago. [URL]http://www.smart-pond.com/wp-content/uploads/2017/12/smartpond_WP1200-WP1200CA_Instruction-Manual_REF.pdf[/URL] [URL]http://www.fantasyfountains.com/wp-content/uploads/2018/02/frothy.pdf[/URL] Both the pump and the nozzle are listed as 1 Inch thread but the Oase is a BSPP thread but I don't know what kind of thread the SmartPond WP1200 is. I have a coupler that can fit the Oase frothy on both ends of the coupler but it's a little too big for the SmartPond pump thread. So I either need to convert the pump output valve to be a 1 inch BSPP thread to match with my existing coupler. Or, I need to find a coupler that has 1 inch BSPP on one side and SmartPond WP1200 thread on the other. Any ideas? By any chance is the SmartPond an NPT thread? [URL]https://www.ralstoninst.com/news/story/the-difference-between-npt-bspp-and-bspt-seals[/URL] From what I am reading I wonder if I have a 1 inch BSPP and 1 inch NPT and that's why they are close but they do not match. This could make sense because I thought Oase products are imported from another country and the SmartPond perhaps is made in the USA. [/QUOTE]