I've been stuck on my first pond build all year, but I think I've revised the plan to something that will work. Does this sound/look like a good plan?
The back sides of the pond are roughly 11' long. I royally screwed myself by building it way too close to my fence line, so I can't really do much for building up a berm or waterfall. I certainly don't have the space to build a bog or homemade waterfall, and will have to rely on buying a small molded rigid waterfall.
I terraced it down to 3' at the deepest section. On the far right the skimmer will pick it up and send it to the back through the mechanical filter. It will then go to the inlet on the bottom of the IBC bog, up through the rocks, and pour out of a pipe at the top into the rigid waterfall liner, and back into the pond at the opposite end.
How does this plan look? I'm really stuck because the next steps involve dropping a couple grand on liners and the pump/filter, and I'm terrified I will do all this and somethings going to go wrong.
Any advice on how to build up the waterfall feature in a very narrow space? I have less than 4' from the fence to the edge of the pond, so I don't imagine cinder blocks would fit and leave enough room for the waterfall liner. Building it is hard enough, I don't even want to think of a way to hide the filter and bog right now...
The back sides of the pond are roughly 11' long. I royally screwed myself by building it way too close to my fence line, so I can't really do much for building up a berm or waterfall. I certainly don't have the space to build a bog or homemade waterfall, and will have to rely on buying a small molded rigid waterfall.
I terraced it down to 3' at the deepest section. On the far right the skimmer will pick it up and send it to the back through the mechanical filter. It will then go to the inlet on the bottom of the IBC bog, up through the rocks, and pour out of a pipe at the top into the rigid waterfall liner, and back into the pond at the opposite end.
How does this plan look? I'm really stuck because the next steps involve dropping a couple grand on liners and the pump/filter, and I'm terrified I will do all this and somethings going to go wrong.
Any advice on how to build up the waterfall feature in a very narrow space? I have less than 4' from the fence to the edge of the pond, so I don't imagine cinder blocks would fit and leave enough room for the waterfall liner. Building it is hard enough, I don't even want to think of a way to hide the filter and bog right now...
