Yamitsu Mega XL Black Box Filter outlet pipes


Daz

Joined
Dec 10, 2014
Messages
43
Reaction score
6
Hi guys

Does anyone no where to get hold of the outlet pipe for a Mega XL Black Box Fish Pond Filter, I'm having difficulty knowing the correct size '

I've been to selco and toolstation to no avail

any idea's
 
Ad

Advertisements

Joined
Jul 29, 2013
Messages
3,271
Reaction score
7,007
Location
Rhode Island, USA
Showcase(s):
1
Hardiness Zone
6a
Country
United States
This may help you. Looks like you should have 2 outlets at 2" in size your inlet should be 1.5"

blackbox10.jpg


21" high - 27.5" long - 21" wide
Shown with optional UV fitted


Easy to clean full width 1.5" spray bar (essential for today's

current trend of using dirty water pumps). Fitted with two 2" exhaust

fed by 1.5" pipe

blackbox11.jpg
 
Ad

Advertisements

Daz

Joined
Dec 10, 2014
Messages
43
Reaction score
6
Thanks for your help guys it seems most diy shops don't sell the 2" cement weld pipes plumbwork or koi shops do but its a lot more expensive.
I have decided to go for a 2x 2 inch to 1.5 inch reducer so i can readily use the 40mm solvent weld pipe
Thanks for all your help
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads


Top