- Joined
- Jun 27, 2026
- Messages
- 1
- Reaction score
- 0
- Country
So first pose, please bear with me I am giving details but no links as I tried once already and got blocked/ marked as spam.
I have a solar powered pump system, all above ground/free standing.
12v system.
100W Solar panel, 30Amp charge controller and a bilge pump, 12V 500GPH, 2.2A. battery is DC house 12V 12AH Lith Ion.
System is electronically sound and works except for the fact that when running 100% from the battery the voltage shown on the charge controller as what I believe to be the battery output, slowly drop from 12.4 V down to about 9v over the course of about 10 minutes, then the pump trip/protects itself and turns off, the entire system goes into an off on/off state over and over again wit the shown voltage flickering hi/low values over and over until I turn it off.
Thanks
Kyle.
I have a solar powered pump system, all above ground/free standing.
12v system.
100W Solar panel, 30Amp charge controller and a bilge pump, 12V 500GPH, 2.2A. battery is DC house 12V 12AH Lith Ion.
System is electronically sound and works except for the fact that when running 100% from the battery the voltage shown on the charge controller as what I believe to be the battery output, slowly drop from 12.4 V down to about 9v over the course of about 10 minutes, then the pump trip/protects itself and turns off, the entire system goes into an off on/off state over and over again wit the shown voltage flickering hi/low values over and over until I turn it off.
My guess is the output on the battery is not "man enough" for the draw on the pump bit any help would be appreciated.Thanks
Kyle.