Replacing pond water


Joined
Mar 21, 2009
Messages
5
Reaction score
0
lost some water in my 600 gallon pond. Was wondering how to replace? i was going to fill a tank/small pool with the hose water let sit and check on PH levels for a day or to before i transfer into the pond. Anything else i should add with the water thanks..
 
Ad

Advertisements

Joined
May 26, 2008
Messages
270
Reaction score
1
Location
sevier county utah
The PH should not change by letting the water sit. You should add a declor though. If the temp and PH are the same then the declor is all you need to add.
 
Ad

Advertisements

DrDave

Innovator
Moderator
Joined
Aug 29, 2007
Messages
6,843
Reaction score
106
Location
Fallbrook, Ca USA
I agree, the PH might be slightly different than your pond, but the difference is of no consequence. It is the chlorine and chlorimides you have to worry about if you are adding more than 25%.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top