ok so im starting to get all of my equpiment in and just had a few questions...
Ok so im getting 2 savio skimmers with a 16" faceplate said to be able to do 8500 gallons an hour... so thats 17000GPH
and the bottom drain is a 4" koitoilet said to do about 3800GPH thats 20800 GPH
and my pond is 20000 gallon and i have to turn it over once every hour correct? well if i have to do that will i need a pump for each skimmer that can do 8500 GPH and then a pump for the bottom drain after it runs through a vortex??
And one of the skimmers im going to run to the bead filter and to a water fall or run 4 2" TPRS
and the other skimmer will do either the water fall or something and the bottom drain will go back to the water fall i suppose also or split the tprs and let one of the pumps from a skimmer run 3 TPRs and the bottom drain one go to 1 other TPR...
any suggestions would be much appreciated =]
Ok so im getting 2 savio skimmers with a 16" faceplate said to be able to do 8500 gallons an hour... so thats 17000GPH
and the bottom drain is a 4" koitoilet said to do about 3800GPH thats 20800 GPH
and my pond is 20000 gallon and i have to turn it over once every hour correct? well if i have to do that will i need a pump for each skimmer that can do 8500 GPH and then a pump for the bottom drain after it runs through a vortex??
And one of the skimmers im going to run to the bead filter and to a water fall or run 4 2" TPRS
and the other skimmer will do either the water fall or something and the bottom drain will go back to the water fall i suppose also or split the tprs and let one of the pumps from a skimmer run 3 TPRs and the bottom drain one go to 1 other TPR...
any suggestions would be much appreciated =]